Bartlett Roof Pros provides professional fascia and soffit in Bartlett, IL for residential and commercial properties across the tri-county northwest suburbs. The fascia is the one board that has to move when a roof plane gets thicker, and most reroofs in this market quietly pretend that it does not. Most estimates never mention it. Above-deck insulation lifts the finished deck by two to three inches.
The drip edge has to land on solid fascia, so the board has to be furred taller or replaced with a wider one. Skip that and the drip edge overhangs into open air, water tracks behind the gutter, and the very plane you spent the most money on becomes the one that rots first. The drip edge has to land on something. The construction underneath is consistent across the village.
One-by-six pine sub-fascia, aluminum coil wrapped over it, vented aluminum soffit panels running back to a J-channel at the wall. It is a fast system to install and a good system to hide problems in, which is exactly what happens. That is why the wrap goes on before anyone has looked at what is behind it, and it is why the rot on a Bartlett roofline is almost always older and larger than the homeowner expects.
The rot pattern is predictable enough that we look there first. Fascia fails at the low corners under the valleys, where three decades of concentrated runoff has been landing, and it fails from the back face outward. Wrapped in aluminum, a board can be gone entirely and look perfect from the driveway. Rot works from the back face outward. So on any plane we are reroofing, the wrap comes off and we look at the wood.
Then we price replacement by the linear foot and put that number in front of you before the shingles are delivered, rather than discovering it on tear-off day when your crew is standing around and you have no room left to say no. The wrap comes off before we quote. Two opinions. Aluminum wrap over a rotting board is cosmetic surgery and we will not do it.
And on the long straight runs typical of the 1990s elevations here, vinyl soffit sags between supports within a decade while aluminum stays flat, which is why we keep specifying the more expensive one. Both of those cost us work occasionally and we keep specifying them anyway, because a soffit run that waves in the sun is a decade of looking at your own bad decision. Aluminum stays flat and vinyl does not.
Our licensed and insured team brings the right materials and equipment to every job — R-30 continuous polyisocyanurate above the deck, nail-base insulated roof sheathing panels, 7/16-inch oriented strand board decking, self-adhered ice barrier membrane at the eave, dense-packed cellulose blown to R-49, unvented cathedral assembly with closed-cell foam — and backs the work with a written workmanship warranty. We serve Bartlett and nearby communities including Streamwood, Hanover Park, Schaumburg, Hoffman Estates.
What We Handle
Everything our fascia and soffit in Bartlett covers
One crew, one point of contact, and the full range of fascia and soffit work in Bartlett, IL. If it is on this list we do it in house rather than handing it to a subcontractor:
- fascia repair Bartlett
- soffit replacement
- rotted fascia board
- aluminum fascia wrap
- vented soffit panels
- sub fascia replacement
- soffit damage animals
- fascia board rot valley
- vinyl vs aluminum soffit
- trim carpentry roofline
- fascia and soffit Bartlett IL
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Bartlett services.
Materials, equipment and how we do fascia and soffit
The difference between fascia and soffit that lasts and fascia and soffit that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with R-30 continuous polyisocyanurate above the deck, nail-base insulated roof sheathing panels, 7/16-inch oriented strand board decking, self-adhered ice barrier membrane at the eave, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Bartlett job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the tri-county northwest suburbs means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do fascia and soffit outside Bartlett
Bartlett Roof Pros covers Bartlett and the surrounding communities of the tri-county northwest suburbs. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Fascia and Soffit in Streamwood, IL — Cook County, population 39,577
- Fascia and Soffit in Hanover Park, IL — Cook County, population 37,470
- Fascia and Soffit in Schaumburg, IL — Cook County, population 78,723
- Fascia and Soffit in Hoffman Estates, IL — Cook County, population 52,530
- Fascia and Soffit in Elk Grove Village, IL — Cook County, population 32,812
- Fascia and Soffit in Rolling Meadows, IL — Cook County, population 24,200
Start on the Bartlett Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Bartlett Chooses Bartlett Roof Pros
- ✓We quote the sheathing question in advance, per sheet and per plane, so no homeowner in this village learns what a roof plane costs on the morning it is opened.
- ✓Every roof gets a written plane count sorted into attic-above and cathedral-above, because those two categories carry insulation obligations that differ by thousands of dollars.
- ✓We will not swap a sheet of decking as a courtesy. That single free panel is what converts an eight-hundred-dollar repair into an envelope project, and we say so up front.
- ✓We do not coat asphalt shingle roofs. It seals moisture into the mat, ends the manufacturer warranty, and costs you the clean tear-off you would otherwise have had.
The standards behind fascia and soffit
Quality here is not a matter of opinion — it is written down. The fascia and soffit work we do in Bartlett follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every fascia and soffit project in Bartlett gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free fascia and soffit free estimate in Bartlett, or request a quote and we'll get right back to you.